Applying /builder/shared-workdir/build/sdk/feeds/base/package/network/utils/linux-atm/patches/000-debian_2.5.1-5.1.patch using plaintext: patching file src/mpoad/mpcd.8 patching file src/led/zeppelin.8 patching file src/sigd/atmsigd.conf.4 patching file src/arpd/io.c patching file src/arpd/table.c patching file src/ilmid/asn1/asn_int.c patching file src/ilmid/asn1/asn_oid.c patching file src/lane/connect.c patching file src/lane/connect_bus.c patching file src/lane/lane_atm.c patching file src/lane/lecs.c patching file src/lib/ans.c patching file src/lib/sdu2cell.c patching file src/lib/unix.c patching file src/maint/atmtcp.c patching file src/maint/hediag.c patching file src/mpoad/io.c patching file src/sigd/io.c patching file src/test/ttcp.c patching file src/arpd/arp.c patching file src/arpd/itf.c patching file src/maint/atmdump.c patching file src/maint/saaldump.c Applying /builder/shared-workdir/build/sdk/feeds/base/package/network/utils/linux-atm/patches/200-no_libfl.patch using plaintext: patching file src/qgen/Makefile.am patching file src/qgen/Makefile.in patching file src/sigd/Makefile.am patching file src/sigd/Makefile.in patching file src/switch/debug/debug.c patching file src/switch/debug/Makefile.am patching file src/switch/debug/Makefile.in patching file src/switch/tcp/Makefile.am patching file src/switch/tcp/Makefile.in patching file src/switch/tcp/tcpsw.c patching file src/test/Makefile.am patching file src/test/Makefile.in patching file src/test/ispl_l.l patching file src/qgen/ql_l.l patching file src/sigd/cfg_l.l Applying /builder/shared-workdir/build/sdk/feeds/base/package/network/utils/linux-atm/patches/300-objcopy_path.patch using plaintext: patching file src/extra/Makefile.am patching file src/extra/Makefile.in Applying /builder/shared-workdir/build/sdk/feeds/base/package/network/utils/linux-atm/patches/400-portability_fixes.patch using plaintext: patching file src/ilmid/io.c patching file src/mpoad/io.c patching file src/sigd/atmsigd.c patching file src/test/align.c Applying /builder/shared-workdir/build/sdk/feeds/base/package/network/utils/linux-atm/patches/500-br2684ctl_script.patch using plaintext: patching file src/br2684/br2684ctl.c Applying /builder/shared-workdir/build/sdk/feeds/base/package/network/utils/linux-atm/patches/501-br2684ctl_itfname.patch using plaintext: patching file src/br2684/br2684ctl.c Applying /builder/shared-workdir/build/sdk/feeds/base/package/network/utils/linux-atm/patches/510-remove-LINUX_NETDEVICE-hack.patch using plaintext: patching file src/oamd/io.c patching file src/arpd/itf.c patching file src/arpd/io.c patching file src/arpd/arp.c Applying /builder/shared-workdir/build/sdk/feeds/base/package/network/utils/linux-atm/patches/600-musl-include.patch using plaintext: patching file src/include/atmd.h patching file src/lib/unix.c patching file src/sigd/kernel.c Applying /builder/shared-workdir/build/sdk/feeds/base/package/network/utils/linux-atm/patches/700-fix-gcc14-build.patch using plaintext: patching file src/arpd/io.c patching file src/led/conn.c patching file src/led/frames.c patching file src/led/frames.h patching file src/led/join.c autoreconf: export WARNINGS= autoreconf: warning: autoconf input should be named 'configure.ac', not 'configure.in' autoreconf: Entering directory '.' autoreconf: configure.in: not using Gettext autoreconf: running: /builder/shared-workdir/build/sdk/staging_dir/host/bin/aclocal -I /builder/shared-workdir/build/sdk/staging_dir/target-arm_xscale_musl_eabi/host/share/aclocal -I /builder/shared-workdir/build/sdk/staging_dir/hostpkg/share/aclocal -I /builder/shared-workdir/build/sdk/staging_dir/target-arm_xscale_musl_eabi/usr/share/aclocal -I m4 -I . --force /builder/shared-workdir/build/sdk/staging_dir/host/bin/aclocal: 2: /builder/shared-workdir/build/sdk/staging_dir/host/bin/aclocal.real: not found autoreconf: error: /builder/shared-workdir/build/sdk/staging_dir/host/bin/aclocal failed with exit status: 127 configure: WARNING: unrecognized options: --disable-nls configure: loading site script /builder/shared-workdir/build/sdk/include/site/arm checking build system type... x86_64-pc-linux-gnu checking host system type... arm-openwrt-linux-gnu checking target system type... arm-openwrt-linux-gnu checking for a BSD-compatible install... /builder/shared-workdir/build/sdk/staging_dir/host/bin/install -c checking whether build environment is sane... yes checking for arm-openwrt-linux-strip... arm-openwrt-linux-muslgnueabi-strip checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for arm-openwrt-linux-gcc... arm-openwrt-linux-muslgnueabi-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether arm-openwrt-linux-muslgnueabi-gcc accepts -g... yes checking for arm-openwrt-linux-muslgnueabi-gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of arm-openwrt-linux-muslgnueabi-gcc... none checking for flex... flex checking lex output file root... lex.yy checking lex library... none needed checking whether yytext is a pointer... no checking for bison... bison -y checking how to print strings... printf checking for a sed that does not truncate output... /builder/shared-workdir/build/sdk/staging_dir/host/bin/sed checking for grep that handles long lines and -e... /builder/shared-workdir/build/sdk/staging_dir/host/bin/grep checking for egrep... /builder/shared-workdir/build/sdk/staging_dir/host/bin/grep -E checking for fgrep... /builder/shared-workdir/build/sdk/staging_dir/host/bin/grep -F checking for ld used by arm-openwrt-linux-muslgnueabi-gcc... arm-openwrt-linux-muslgnueabi-ld.bfd checking if the linker (arm-openwrt-linux-muslgnueabi-ld.bfd) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... arm-openwrt-linux-muslgnueabi-gcc-nm checking the name lister (arm-openwrt-linux-muslgnueabi-gcc-nm) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking for arm-openwrt-linux-muslgnueabi-ld.bfd option to reload object files... -r checking for arm-openwrt-linux-objdump... arm-openwrt-linux-muslgnueabi-objdump checking how to recognize dependent libraries... pass_all checking for arm-openwrt-linux-ar... arm-openwrt-linux-muslgnueabi-gcc-ar checking for arm-openwrt-linux-strip... (cached) arm-openwrt-linux-muslgnueabi-strip checking for arm-openwrt-linux-ranlib... arm-openwrt-linux-muslgnueabi-gcc-ranlib checking command to parse arm-openwrt-linux-muslgnueabi-gcc-nm output from arm-openwrt-linux-muslgnueabi-gcc object... ok checking how to run the C preprocessor... arm-openwrt-linux-muslgnueabi-gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if arm-openwrt-linux-muslgnueabi-gcc supports -fno-rtti -fno-exceptions... no checking for arm-openwrt-linux-muslgnueabi-gcc option to produce PIC... -fPIC -DPIC checking if arm-openwrt-linux-muslgnueabi-gcc PIC flag -fPIC -DPIC works... yes checking if arm-openwrt-linux-muslgnueabi-gcc static flag -static works... yes checking if arm-openwrt-linux-muslgnueabi-gcc supports -c -o file.o... yes checking if arm-openwrt-linux-muslgnueabi-gcc supports -c -o file.o... (cached) yes checking whether the arm-openwrt-linux-muslgnueabi-gcc linker (arm-openwrt-linux-muslgnueabi-ld.bfd) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for perl... /builder/shared-workdir/build/sdk/staging_dir/host/bin/perl checking asm/errno.h usability... yes checking asm/errno.h presence... yes checking for asm/errno.h... yes checking linux/atmsap.h usability... yes checking linux/atmsap.h presence... yes checking for linux/atmsap.h... yes checking for main in -lresolv... yes checking cc for build... checking for gcc... gcc gcc configure: WARNING: *** atmoamd will not be built. Missing kernel support? configure: creating ./config.status config.status: creating Makefile config.status: creating doc/Makefile config.status: creating src/Makefile config.status: creating src/include/Makefile config.status: creating src/lib/Makefile config.status: creating src/test/Makefile config.status: creating src/debug/Makefile config.status: creating src/qgen/Makefile config.status: creating src/saal/Makefile config.status: creating src/q2931/Makefile config.status: creating src/sigd/Makefile config.status: creating src/maint/Makefile config.status: creating src/arpd/Makefile config.status: creating src/ilmid/Makefile config.status: creating src/ilmid/asn1/Makefile config.status: creating src/man/Makefile config.status: creating src/led/Makefile config.status: creating src/lane/Makefile config.status: creating src/mpoad/Makefile config.status: creating src/oamd/Makefile config.status: creating src/switch/Makefile config.status: creating src/switch/debug/Makefile config.status: creating src/switch/tcp/Makefile config.status: creating src/br2684/Makefile config.status: creating src/config/Makefile config.status: creating src/extra/Makefile config.status: creating src/extra/linux-atm.spec config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --disable-nls make[4]: Entering directory '/builder/shared-workdir/build/sdk/build_dir/target-arm_xscale_musl_eabi/linux-kirkwood_generic/linux-atm-2.5.2/src/qgen' cd ../.. && make am--refresh make[5]: Entering directory '/builder/shared-workdir/build/sdk/build_dir/target-arm_xscale_musl_eabi/linux-kirkwood_generic/linux-atm-2.5.2' CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/bash /builder/shared-workdir/build/sdk/build_dir/target-arm_xscale_musl_eabi/linux-kirkwood_generic/linux-atm-2.5.2/missing --run aclocal-1.11 /builder/shared-workdir/build/sdk/staging_dir/host/bin/aclocal-1.11: 2: /builder/shared-workdir/build/sdk/staging_dir/host/bin/aclocal.real: not found WARNING: `aclocal-1.11' is missing on your system. You should only need it if you modified `acinclude.m4' or `configure.in'. You might want to install the `Automake' and `Perl' packages. Grab them from any GNU archive site. cd . && /bin/bash /builder/shared-workdir/build/sdk/build_dir/target-arm_xscale_musl_eabi/linux-kirkwood_generic/linux-atm-2.5.2/missing --run automake-1.11 --gnu /builder/shared-workdir/build/sdk/build_dir/target-arm_xscale_musl_eabi/linux-kirkwood_generic/linux-atm-2.5.2/missing: line 52: automake-1.11: command not found WARNING: `automake-1.11' is missing on your system. You should only need it if you modified `Makefile.am', `acinclude.m4' or `configure.in'. You might want to install the `Automake' and `Perl' packages. Grab them from any GNU archive site. CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/bash /builder/shared-workdir/build/sdk/build_dir/target-arm_xscale_musl_eabi/linux-kirkwood_generic/linux-atm-2.5.2/missing --run autoconf Can't locate Autom4te/ChannelDefs.pm in @INC (you may need to install the Autom4te::ChannelDefs module) (@INC contains: /builder/shared-workdir/build/staging_dir/host/share/autoconf /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.32.1 /usr/local/share/perl/5.32.1 /usr/lib/x86_64-linux-gnu/perl5/5.32 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl-base /usr/lib/x86_64-linux-gnu/perl/5.32 /usr/share/perl/5.32 /usr/local/lib/site_perl) at /builder/shared-workdir/build/sdk/staging_dir/host/bin/autoconf line 42. BEGIN failed--compilation aborted at /builder/shared-workdir/build/sdk/staging_dir/host/bin/autoconf line 42. WARNING: `autoconf' is missing on your system. You should only need it if you modified `configure.in'. You might want to install the `Autoconf' and `GNU m4' packages. Grab them from any GNU archive site. /bin/bash ./config.status --recheck running CONFIG_SHELL=/bin/bash /bin/bash ./configure --target=arm-openwrt-linux --host=arm-openwrt-linux --build=x86_64-pc-linux-gnu --disable-dependency-tracking --program-prefix= --program-suffix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --libexecdir=/usr/lib --sysconfdir=/etc --datadir=/usr/share --localstatedir=/var --mandir=/usr/man --infodir=/usr/info --disable-nls build_alias=x86_64-pc-linux-gnu host_alias=arm-openwrt-linux target_alias=arm-openwrt-linux CC=arm-openwrt-linux-muslgnueabi-gcc CFLAGS=-Os -pipe -fno-caller-saves -fno-plt -fhonour-copts -mfloat-abi=soft -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-arm_xscale_musl_eabi/linux-kirkwood_generic/linux-atm-2.5.2=linux-atm-2.5.2 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -I/builder/shared-workdir/build/sdk/build_dir/target-arm_xscale_musl_eabi/linux-kirkwood_generic/linux-6.6.78/user_headers/include LDFLAGS=-L/builder/shared-workdir/build/sdk/staging_dir/toolchain-arm_xscale_gcc-13.3.0_musl_eabi/usr/lib -L/builder/shared-workdir/build/sdk/staging_dir/toolchain-arm_xscale_gcc-13.3.0_musl_eabi/lib -fuse-ld=bfd -znow -zrelro CPPFLAGS=-I/builder/shared-workdir/build/sdk/staging_dir/toolchain-arm_xscale_gcc-13.3.0_musl_eabi/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-arm_xscale_gcc-13.3.0_musl_eabi/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-arm_xscale_gcc-13.3.0_musl_eabi/include/fortify --no-create --no-recursion configure: WARNING: unrecognized options: --disable-nls configure: loading site script /builder/shared-workdir/build/sdk/include/site/arm checking build system type... x86_64-pc-linux-gnu checking host system type... arm-openwrt-linux-gnu checking target system type... arm-openwrt-linux-gnu checking for a BSD-compatible install... /builder/shared-workdir/build/sdk/staging_dir/host/bin/install -c checking whether build environment is sane... yes checking for arm-openwrt-linux-strip... arm-openwrt-linux-strip checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for arm-openwrt-linux-gcc... arm-openwrt-linux-muslgnueabi-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether arm-openwrt-linux-muslgnueabi-gcc accepts -g... yes checking for arm-openwrt-linux-muslgnueabi-gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of arm-openwrt-linux-muslgnueabi-gcc... none checking for flex... flex checking lex output file root... lex.yy checking lex library... none needed checking whether yytext is a pointer... no checking for bison... bison -y checking how to print strings... printf checking for a sed that does not truncate output... /builder/shared-workdir/build/sdk/staging_dir/host/bin/sed checking for grep that handles long lines and -e... /builder/shared-workdir/build/sdk/staging_dir/host/bin/grep checking for egrep... /builder/shared-workdir/build/sdk/staging_dir/host/bin/grep -E checking for fgrep... /builder/shared-workdir/build/sdk/staging_dir/host/bin/grep -F checking for ld used by arm-openwrt-linux-muslgnueabi-gcc... /builder/shared-workdir/build/sdk/staging_dir/toolchain-arm_xscale_gcc-13.3.0_musl_eabi/arm-openwrt-linux-muslgnueabi/bin/ld checking if the linker (/builder/shared-workdir/build/sdk/staging_dir/toolchain-arm_xscale_gcc-13.3.0_musl_eabi/arm-openwrt-linux-muslgnueabi/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /builder/shared-workdir/build/sdk/staging_dir/toolchain-arm_xscale_gcc-13.3.0_musl_eabi/bin/arm-openwrt-linux-nm -B checking the name lister (/builder/shared-workdir/build/sdk/staging_dir/toolchain-arm_xscale_gcc-13.3.0_musl_eabi/bin/arm-openwrt-linux-nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking for /builder/shared-workdir/build/sdk/staging_dir/toolchain-arm_xscale_gcc-13.3.0_musl_eabi/arm-openwrt-linux-muslgnueabi/bin/ld option to reload object files... -r checking for arm-openwrt-linux-objdump... arm-openwrt-linux-objdump checking how to recognize dependent libraries... pass_all checking for arm-openwrt-linux-ar... arm-openwrt-linux-ar checking for arm-openwrt-linux-strip... (cached) arm-openwrt-linux-strip checking for arm-openwrt-linux-ranlib... arm-openwrt-linux-ranlib checking command to parse /builder/shared-workdir/build/sdk/staging_dir/toolchain-arm_xscale_gcc-13.3.0_musl_eabi/bin/arm-openwrt-linux-nm -B output from arm-openwrt-linux-muslgnueabi-gcc object... ok checking how to run the C preprocessor... arm-openwrt-linux-muslgnueabi-gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if arm-openwrt-linux-muslgnueabi-gcc supports -fno-rtti -fno-exceptions... no checking for arm-openwrt-linux-muslgnueabi-gcc option to produce PIC... -fPIC -DPIC checking if arm-openwrt-linux-muslgnueabi-gcc PIC flag -fPIC -DPIC works... yes checking if arm-openwrt-linux-muslgnueabi-gcc static flag -static works... yes checking if arm-openwrt-linux-muslgnueabi-gcc supports -c -o file.o... yes checking if arm-openwrt-linux-muslgnueabi-gcc supports -c -o file.o... (cached) yes checking whether the arm-openwrt-linux-muslgnueabi-gcc linker (/builder/shared-workdir/build/sdk/staging_dir/toolchain-arm_xscale_gcc-13.3.0_musl_eabi/arm-openwrt-linux-muslgnueabi/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for perl... /builder/shared-workdir/build/sdk/staging_dir/host/bin/perl checking asm/errno.h usability... yes checking asm/errno.h presence... yes checking for asm/errno.h... yes checking linux/atmsap.h usability... yes checking linux/atmsap.h presence... yes checking for linux/atmsap.h... yes checking for main in -lresolv... yes checking cc for build... checking for gcc... gcc gcc configure: WARNING: *** atmoamd will not be built. Missing kernel support? configure: creating ./config.status configure: WARNING: unrecognized options: --disable-nls /bin/bash ./config.status config.status: creating Makefile config.status: creating doc/Makefile config.status: creating src/Makefile config.status: creating src/include/Makefile config.status: creating src/lib/Makefile config.status: creating src/test/Makefile config.status: creating src/debug/Makefile config.status: creating src/qgen/Makefile config.status: creating src/saal/Makefile config.status: creating src/q2931/Makefile config.status: creating src/sigd/Makefile config.status: creating src/maint/Makefile config.status: creating src/arpd/Makefile config.status: creating src/ilmid/Makefile config.status: creating src/ilmid/asn1/Makefile config.status: creating src/man/Makefile config.status: creating src/led/Makefile config.status: creating src/lane/Makefile config.status: creating src/mpoad/Makefile config.status: creating src/oamd/Makefile config.status: creating src/switch/Makefile config.status: creating src/switch/debug/Makefile config.status: creating src/switch/tcp/Makefile config.status: creating src/br2684/Makefile config.status: creating src/config/Makefile config.status: creating src/extra/Makefile config.status: creating src/extra/linux-atm.spec config.status: creating config.h config.status: config.h is unchanged config.status: executing depfiles commands config.status: executing libtool commands make[5]: Leaving directory '/builder/shared-workdir/build/sdk/build_dir/target-arm_xscale_musl_eabi/linux-kirkwood_generic/linux-atm-2.5.2' cd ../.. && make am--refresh cd ../.. && make am--refresh gcc -I../../src/include -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c common.c gcc -I../../src/include -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c file.c gcc -I../../src/include -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c first.c gcc -I../../src/include -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c ql_y.c ql_y.y: In function 'copy_block': ql_y.y:98:6: warning: enumeration value 'vt_id' not handled in switch [-Wswitch] 98 | switch (orig_field->value->type) { | ^~~~~~ /bin/bash ../../ylwrap ql_l.l lex.yy.c ql_l.c -- flex gcc -I../../src/include -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c qgen.c gcc -I../../src/include -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c second.c gcc -I../../src/include -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c third.c gcc -I../../src/include -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c ql_l.c ql_l.c:1272:16: warning: 'input' defined but not used [-Wunused-function] 1272 | #else | ^ ql_l.c:1229:17: warning: 'yyunput' defined but not used [-Wunused-function] 1229 | | ^ gcc -I../../src/include -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -o qgen common.o file.o first.o ql_y.o ql_l.o qgen.o second.o third.o make[4]: Leaving directory '/builder/shared-workdir/build/sdk/build_dir/target-arm_xscale_musl_eabi/linux-kirkwood_generic/linux-atm-2.5.2/src/qgen' make[4]: Entering directory '/builder/shared-workdir/build/sdk/build_dir/target-arm_xscale_musl_eabi/linux-kirkwood_generic/linux-atm-2.5.2' (CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/bash /builder/shared-workdir/build/sdk/build_dir/target-arm_xscale_musl_eabi/linux-kirkwood_generic/linux-atm-2.5.2/missing --run autoheader) autoheader: warning: autoconf input should be named 'configure.ac', not 'configure.in' autoheader: error: error: AC_CONFIG_HEADERS not found in configure.in make[4]: *** [Makefile:285: config.h.in] Error 1 make[4]: Leaving directory '/builder/shared-workdir/build/sdk/build_dir/target-arm_xscale_musl_eabi/linux-kirkwood_generic/linux-atm-2.5.2' make[3]: *** [Makefile:199: /builder/shared-workdir/build/sdk/build_dir/target-arm_xscale_musl_eabi/linux-kirkwood_generic/linux-atm-2.5.2/.built] Error 2 time: package/feeds/base/linux-atm/compile#10.25#6.49#29.85